Two ducted fan
units are included and ready to accept the recommended motors
(EFLM1320DF). The fully molded and painted airframe requires
little time to assemble, making this Super Airliner ready for
takeoff in a short amount of time. Additionally, all flight
control surfaces are pre-hinged, reducing assembly time and
ensuring smooth response right away. The included shock
absorbing landing gear ensures that takeoffs and landings are
smooth and stable.
In order to fly,
you will need: two E-flite 400DF motors (EFLM1320DF
or
EFLM1320DF2 for a 2-pack); two 3-cell 11.1V 2100mAh Li-Po
battery packs; a 4-channel FM radio system; two 20A brushless
ESCs, four sub-micro servos and one standard servo; two Y
harnesses; one 6-inch extension lead; and two 12-inch extension
leads.
- Fully
molded and painted for quick assembly
- Ducted Fan
Units are included and pre-installed
-
Shock-absorbing landing gear and more
- Molded
Aileron Servo pockets
- All flight
control surfaces come pre-hinged
- Large
size, generous wing area, and light weight
Wing Span: 55
in (1400mm)
Overall Length: 57 in (1450mm)
Wing Area: 505 sq in (3245 sq cm)
Flying Weight: 3.25 lb (1.5 kg)
Motor Size: BL 400 DF Outrunner 3500Kv (EFLM1320DF)
(2 required)
Radio: JR Sport S400 or SX600
Servos: four (4) E-flite s75 sub-micro servos (EFLRS75)
and one JR Sport ST47BB servo (JSP20060)
Trim Scheme Colors: Prepainted
CG (center of gravity): 5.5 in (140mm) back from the
leading edge
Prop Size: 66mm 3 bladed fan unit (2)(included)
Speed Control : 20 Amp Brushless (EFLA311B)
(2 required)
Recommended Battery: 2100 3-cell Li-Po (THP21003SPL)
(2 required)
Flaps: n/a
Retracts: n/a
Approx. Flying Duration: 9 - 10 minutes
|
