|
E-Flite Blade 400 RTF Electric Helicopter
EFLH1400 -
Price: $469.99
- Completely
assembled and tested at the factory
- Capable of
sport flying and 3D aerobatics right out of the box
- Includes
Spektrum’s DX6i 2.4GHz DSM2 6-Channel computer programmable
transmitter and factory-installed AR6100e Microlite receiver
- DS75 Digital
Sub-Micro servos and G110 Micro Heading Lock gyro offer precise
and powerful control
- 420H brushless
motor, 25-amp brushless ESC and 3S 11.1V 1800mAh 20C Li-Po
battery deliver incredible power and performance
- CCPM control
with push-pull elevator and direct-to-swash aileron/pitch
linkages
- Stainless
steel flybar, main shaft and tail shaft
The
Blade 400 3D is designed to give intermediate to advanced heli
pilots a ready-to-fly experience like no other. It comes 100%
factory built and flight tested so you can get flying right away.
There is nothing left to assemble or set up. The Blade 400 3D is
ready for hovering and 3D aerobatics as soon as you finish charging
the battery. And you can fly it just about anywhere, anytime thanks
to the included Spektrum 2.4GHz DX6i radio system that avoids
interference with other RC users, even those on other 2.4GHz
systems. You also get the benefit of the DX6i’s advanced DSM2
protocol that provides the kind of locked-in, solid response that
will let you fly even the most demanding 3D maneuvers with absolute
precision.
The
Blade 400 3D is the first ready-to-fly mini-heli to come equipped
with Spektrum’s advanced DX6i 2.4GHz DSM2™ 6-channel programmable
computer aircraft system. Besides providing freedom from frequency
restrictions and interference, the DX6i’s DSM2 technology offers
other unique advantages like faster control response and innovative
features such as ServoSync™. ServoSync automatically resequences
transmitted data so mixed servos receive their pulses at the same
time so you can fly extreme 3D aerobatics with absolute precision.
The system also includes the feather-light, 4.4-gram Spektrum
AR6100e Microlite Receiver.
Other
DX6i features include:
• Full-range capability
• 10-model memory
• Heli and airplane programming
• Two types of swashplate mixing: standard or 120º CCPM
• 3-axis dual rates and exponential
• Travel adjust
• Servo monitor
• Two 5-point throttle curves
• Three 5-point pitch curves
• Revo mixing
• Gyro sensitivy programming
• Two programmable mixes
The DX6i is not only perfectly suited for the Blade 400––it can also
be used to fly just about any size and type of model due to its
full-range and programming capabilities.
E-flite uses top-quality engineering and materials in everything it
makes, so you always get the maximum level of value and fun. And E-flite
backs all of its products with the best customer service and support
in the hobby so your electric flight experience is always a positive
one.
E-Flite Blade 400 Specifications
Type: RTF
Electric 3D Mini Heli
Main Rotor Diameter: 28.2 in (718mm)
Tail Rotor Diameter: 5.3 in (135mm)
Gross Weight: RTF with Li-Po battery, 23.5 oz (665 g)
Length: 25.6 in (650mm)
Motor Size: 420H brushless outrunner, 3800kV
Kit/ARF/RTF: RTF
Control System: Spektrum DX6i 2.4GHz DSM2 computer
programmabe transmitter (included), Spektrum AR6100e Microlite
receiver (installed), DS75 Digital Sub-Micro Servos (4
installed), 120 degree CCPM
Rotor Blade Length: 12.8 in (325mm)
|
