| |
E-Flite Blade CX3
EFLH2000
The flight experts have
done it again. The Blade CX3 RTF gives pilots unbelievable micro-heli
excitement. The CX3 includes a radio system equipped with Spektrum
2.4GHz DSM2 technology in the LP5DSM transmitter and Spektrum
AR6100e receiver, providing 5-channel control with interference-free
flying. It’s covered in the licensed MD 520N scale body with an
attractive police trim scheme.
Just like its predecessor, the Blade CX3 offers first-time
helicopter pilots exceptional stability and incredible control
through the coaxial, counter-rotating head design and 3-in-1 control
unit. In addition, this CX3 also features two feather-light S60
Super Sub-Micro servos that provide full cyclic movement of forward,
backward and side-to-side maneuverability. The Blade CX3 also
includes a heading lock gyro to provide better control and locked-in
performance. As with other co-axial Blade helicopters, no flying
experience is required to begin your heli flight with the Blade CX3.
This indoor helicopter is 100% factory-assembled, test flown and
ready to fly out of the box, no assembly or setup required—and
nothing left to buy. The Blade CX3 is the first coaxial heli to
incorporate a heading lock gyro, a Spektrum DSM2 2.4GHz radio system
and a scale body all in one convenient ready-to-fly package.
E-Flight Blade CX3 Features
- Advanced
3-in-1 control unit including main motor ESCs, mixer and heading
lock gyro
- The heading
lock gyro in the CX3 offers incredible hold and control to
maximize your flight experience.
- Interference
free 5-channel E-flite transmitter with built-in Spektrum 2.4GHz
DSM2 technology
- Lightweight
Spektrum AR6100e receiver with DSM2 technology
- Two
feather-light S60 Super Sub-Micro servos--just 6.0 grams each
- DC Li-Po
balancing charger and convenient AC adapter
- 2S 7.4V 800mAh
Li-Po battery pack with charge protection circuitry
- Co-axial,
counter-rotating rotor blades that make hovering easy for
first-time pilots
- 100% factory
assembled and test flown--no assembly or difficult setup
required
- Compatible
with most Blade CX2 option parts
- Optional LED
navigational light set sold separately (EFLH2009 or EFLH2009R).
Specifications
Main Rotor
Diameter: 13.6 in (345mm)
Gross Weight: 8.0 oz (227g) w/battery
Length: 16.4 in (415mm)
Motor Size: 180 Brushed (2 installed)
Kit/ARF/RTF: RTF
Control System: E-flite LP5DSM Transmitter
First
Time Flyers
Similar
Products
Included
Parts
Listing
Optional
Accessories
Blade CX3 Blind & Fly
|
|
