E-Flite Brio 10 ARF

RC Cars | RC Airplanes | RC Boats | General Hobbies

Home | Contact | Shipping | Site Map | Cart

E-Flite Airplanes, Brushless Motors

E-Flite Brio 10, Ultimate, Tribute, Cessna 182

Product Search

RC Hobbies Home

Remote Control Cars

Radio Control Airplanes

E-Flite Brio 10 ARF

EFL2275 - Price: $119.99

At the heart of the Brio's performance is a low aspect ratio wing that moves the center of lift closer to the fuselage. The result is an electric pattern plane with outstanding roll rates and a locked-in feel that will give you the confidence to fly artistic aerobatics with absolute precision.

Here are just a few of the many features that you'll find when you buy an E-Flite Brio 10:

Factory Painted Fiberglass Parts and Aluminum Landing Gear
The Brio 10 comes with expertly painted fiberglass parts such as the cowl and wheel pants. Tough, lightweight aluminum landing gear is also included.

Quality Construction and Large Control Surfaces
The Brio 10 is built from the best balsa and light-ply materials, then covered in genuine Hangar 9 UltraCote. Its generously proportioned control surfaces give it extraordinary responsiveness.

Magnetic Canopy Hatch
The Brio 10’s handy magnetic canopy hatch stays securely in place without screws or tape.

Carbon Fiber Stiffeners
Part of the Brio 10’s outstanding precision comes from carbon fiber stiffeners on the elevator that virtually eliminate flex.

Whether you desire aggressive 3D or high-speed F3A-type maneuvers, the Brio 10 will fly exactly where it’s pointed, flight after flight, without needing constant trim adjustments.

Brio 10 Specifications

Brio 10 Parts

Wing Span: 41 in (1040mm)
Overall Length: 40 in (1015mm)
Wing Area: 325 sq in (21 sq dm)
Flying Weight: 28-34oz (795-965 g)
Motor Size: Park 480 Outrunner, Power 10 Outrunner, Six Series
Radio: 6-Channel or greater
Servos: 4 Sub-Micros
Trim Scheme Colors: UltraCote White (#870), Fluorescent Blue (#896). Pearl Bright Yellow (#85200), and Fluorescent Violet (#899)
CG (center of gravity): 3-7/8 to 4-3/8 in (100 to 110mm) behind the leading edge
Prop Size: 11x7 to 12x8 Electric
Spinner Size: 1-3/4 in
Hardware Included: Yes
Speed Control : 35A to 40A Brushless
Recommended Battery: 3-Cell 11.1V 1320mAh to 2100mAh Li-Po
Control Throw (Ailerons): 7/16 in (11mm) Low Rate or 7/8 in (22mm) High Rate
Control Throw (Elevator): 7/8 in (22mm) Low Rate or 2 in (50mm) High Rate
Control Throw (Rudder): 1-1/2 in (38mm) Low Rate or 2-1/2 in (63mm) High Rate
Approx. Flying Duration: 10 minutes
Approx. Assembly Time: 5-6 hours

A 6-Channel Radio, 6-Ch Receiver, 40A Brushless ESC, Brushless Motor, Prop and 11.1V 3-Cell Li-Po Battery are needed for completion.