E-flite’s AT-6
25e ARF is a superb scale replica of the legendary “Texan”
trainer used by the U.S.—and its allies—from WWII through the
late 1960s. It features a level of scale detail that is
exceptional for an ARF of this size. You get all this realism
without having to spend weeks of building, covering and
painting. Just about everything has been done for you before you
even open the box. All that’s left to do is a few hours of final
assembly and radio installation. When you’re done, you’ll have a
fantastic-flying scale warbird your friends will swear you
scratch-built yourself.
The AT-6 is the
first in E-flite's Platinum Series. Our PLATINUM SERIES
delivers superior, enhanced features and meticulous attention to
detail. The Platinum Series is one more way that E-flite brings
you the most advanced electric flight experience.
The AT-6 25e comes out of the box with all kinds of details that
have been finished for you, including a factory-painted
fiberglass cowl, air scoops, dummy radial engine, painted canopy
and pilot, scale strut covers, scale trim scheme and much more.
And, the Texan’s sheeted airframe compares favorably to its
full-scale cousin. It helps maintain the model’s strict scale
appearance and strong flight performance. Scale airfoils were
used to maintain the exact scale outline of the AT-6 Texan's
tail surfaces to include counterbalances. Both the elevators and
rudder are pre-hinged out of the box and ready for installation.
An optional detailed cockpit kit is available separately (EFL4512),
which includes an aft instrument hood, main fuselage rollover
structure, two seat backs, and a floor. One pilot is included
with the kit and an additional pilot is available separately
(EFLA150). Genuine Hangar 9® UltraCote® provides a durable,
refined finish.
The scale split
flaps are operational and pre-hinged right out of the box.
Using a unique pin interlock system, they plug together and
operate using only 2 servos. Optional Robart retracts (EFL4515)
are available that have been specially designed for the AT-6
25e. Making these mechanical retracts functional is as simple as
installing a servo and connecting the pre-bent wire linkages.
Getting to the
battery and speed control is a cinch. Just lift off the hatch,
which adheres tightly to the fuselage thanks to a strong,
permanent magnet that won’t fall off mid-flight. The large
battery compartment can accommodate a wide range of Li-Po packs.
Transportability is significantly increased by plug-in
horizontal stabilizer halves and outboard wing panels. The
center wing section also removes from the fuselage with only two
bolts for more convenience.
- 90%
complete—just a few hours of assembly and you’re flying
- Lightweight
construction
- Fully
sheeted airframe to help maintain scale appearance
- Covered in
genuine Hangar 9 UltraCote
- Retract- and
flap-ready right from the box
- Optional
Robart retractable landing gear is available separately
-
Factory-painted fiberglass cowl and scale scoops
- Scale finish
and markings
- Firewall
designed to accept E-flite Power 25 BL Outrunner Motor
- Plug-in
outboard wing panels for convenient transport and storage
- Easy-access
magnetic battery hatch
- Extremely
accurate scale outline worthy of the most demanding scale
modelers
- Wing
utilizes two Selig airfoils for optimum flight performance
at all speeds
Wing Span: 54"
(1370mm)
Overall Length: 39" (990mm)
Wing Area: 455 sq in (29.4 dm)
Flying Weight: 3.9 - 4.5 lbs (1.8 - 2.0 kg)
Motor Size: Power 25
Radio: 6 channels w/7 micro servos
Servos: (7) JR Sport MC35's, (1) JR Sport RT88 for
optional retracts
Trim Scheme Colors: Ultracote Gray with red and yellow
trim
Prop Size: APC 12x8E
Hardware Included: yes
Speed Control : 40 - 60 Amp
Recommended Battery: 11.1 V 4200 mAh 3-cell Li-po
Scale: Stand off Scale
Approx. Assembly Time: 6 - 8 hours |
