| |
The CAP 232 BP
3D combines the sturdy construction of a balsa/light-ply
airframe with the uninhibited 3D capability of a lightweight
profile park flyer. It’s all made possible by its intelligently
engineered, open structure design that keeps weight to a bare
minimum while providing all the structural integrity of a real
wood airframe. This feather-light construction, combined with a
high-output brushless motor, will provide spine-tingling 3D and
freestyle performance that will let you really push the limits.
And it comes from the factory 90% built and covered in genuine
UltraCote® and UltraCote Lite so you can be up and flying in no
time.
- Ingenious
open-structure balsa/light-ply design minimizes weight and
maximizes strength
- Light wing
loading and large control surfaces for astonishing freestyle
and 3D capability
- 90%
pre-built and covered in UltraCote
- Carbon
fiber pushrods
- All
hardware is included
-
Out-of-the-box compatibility with E-flite outrunner or
inrunner brushless motors
- Outrunner
Stick Mount included
Needed for
Completion: 6-channel transmitter (for proper mixing and
dual rate capabilities), Micro receiver, 4 sub-micro servos,
Motor, 20A Brushless ESC, 11x3.8 Slow Flyer Prop, Battery &
Charger
Wing Span: 35.5
in (900mm)
Overall Length: 35.5 in (900mm)
Wing Area: 425 sq in (27.5 sq dm)
Flying Weight: 15.5-17 oz (440-480g)
Motor Size: Park 450 or Park 400
Radio: 6 channels (for proper mixing)
Servos: 4 sub-micro
Trim Scheme Colors: UltraCote White (HANU870), Sky Blue
(HANU875), Bright Yellow (HANU872), UltraCote Lite Transparent
Blue (HANU969), UltraCote Lite Transparent Clear (HANU964)
CG (center of gravity): 4-3/4" (120mm) back measured from
the center of the leading edge of the wing next to the fuselage
Prop Size: 11x3.8 Slow Flyer
Hardware Included: Yes
Speed Control : 20A Brushless
Recommended Battery: 11.1V 3-cell 910-1320mAh Li-Po
Control Throw (Ailerons): 1.25" (32mm) with 20% Expo on
Low or 1.75" (45mm) with 43% Expo on High Up/Down
Control Throw (Elevator): 2" (50mm) with 20% Expo on Low
or 3" (75mm) with 49% Expo on High Up/Down
Control Throw (Rudder): 3" (75mm) Low & High Left/Right
Scale: Park Flyer
Approx. Assembly Time: 3-4 hours
|
|
