| |
The Extra 260
was designed by former E-TOC champ George Hicks to give profile
3D foamie fans a great-looking, lightweight plane with
competition-level performance. At the heart of its superb
flight characteristics is a rigid, carbon-reinforced real Depron
foam airframe. This unique design eliminates flex so control
response is crisp and precise.
- Made with
genuine 3mm Depron foam
- Designed
by aerodynamicist and competitor George Hicks
- Extensive
high-quality lightweight carbon fiber support rod truss
system for reinforcement and strength
- Installed
carbon fiber spar reinforcement on leading edges and
trailing edge of wing, fuselage, and tail
-
Lightweight for extreme 3D performance
- Excellent
precision flying characteristics
- Perfect
match with our E-flite Park 300 motor, or the Park 370
1200Kv hollow shaft motor with a variable pitch prop
- Engineered
for easy mounting of variable pitch prop systems like E-flite's
ShowStopper VPP and servo
- Vibrant
pre-painted finish
- Precision
laser cut parts construction
Needed for
Completion: 6-channel transmitter (for proper mixing and
dual rate capabilities), Micro receiver, 4 sub-micro servos,
Motor, 10A Brushless ESC, 8x3.8 Slow Flyer Prop, Battery &
Charger
Wing Span: 32.5
in (825mm)
Overall Length: 33 in (840mm)
Wing Area: 260 sp in (16.8 sq dm)
Flying Weight: 7.75-9.5 oz (220-270 g)
Motor Size: Park 300 1380Kv or Park 370 1200Kv HS for VPP
Radio: 6 channels with 4 sub-micro servos
Servos: E-flite S60 6g sub-servos (4) plus one S75 for
VPP option
Trim Scheme Colors: pre-painted blue and red
CG (center of gravity): 3.5 in (90mm) behind the front
wing spar
Prop Size: 8x3.8 APC Slow Flyer
Hardware Included: Yes
Speed Control : 10 Amp Brushless
Recommended Battery: 3 Cells 480-730mAh Li-Po
Control Throw (Ailerons): Low 1-1/2" (38mm) Up/Down or
High 2-1/4" (57mm) Up/Down or George Hicks - 55 degree High
Control Throw (Elevator): Low 1-1/4" (32mm) Up/Down or
High 2-1/2" (63mm) Up/Down or George Hicks - 55 degree High
Control Throw (Rudder): Low 2" (51mm) Right/Left or High
3" (76mm) Right/Left or George Hicks - 55 degree High
Approx. Assembly Time: 4 hours or less
|
|
