| |
The Mini FuntanaX
is another in E-flite’s outstanding line of electric RC aircraft
and accessories. E-flite uses top-quality engineering and
materials in everything they make, so you always get the maximum
level of value and fun. And E-flite backs all of its products
with the best customer service and support in the hobby, so your
electric flight experience is always a positive one.
To create the
new Mini FuntanaX™ ARF, E-flite® began with the proven 3D
benefits of the original Mini Funtana design. From there, they
increased the wing area, added wing fillets and optional Side
Force Generators, resulting in an airplane that excels in
high-alpha and all-around maneuverability. Outfitted
with an E-flite Park 480 brushless outrunner, the Mini FuntanaX
is capable of superb vertical performance.
- Generous
wing area for lighter wing loading—26% larger than original
Mini Funtana
- Tapered
thickness airfoil for improved aerodynamic performance
- Optional
Side Force Generators (SFG's) included
- Large
control surfaces for precise control in high-alpha flight
- Designed
for use with E-flite’s Park 480 Brushless Outrunner Motor
- Wing
fillets
- Steerable
tail wheel for better ground handling
-
Easy-access magnetic battery hatch
-
Factory-painted fiberglass cowl and wheel pants
- Aluminum
landing gear
- Assembles
in just a few evenings
-
Balsa/light ply construction covered in genuine UltraCote
Needed for
Completion: 6-channel transmitter (for proper mixing and
dual rate capabilities), Micro receiver, 4 sub-micro servos,
Motor, 40A Brushless ESC, 12x6 Electric Prop, Battery & Charger
Wing Span: 43
in (1092mm)
Overall Length: 40.5 in (1028mm)
Wing Area: 447 sq in (28.8 sq dm)
Flying Weight: 27–29 oz (765–822 g)
Motor Size: Park 480 BL Outrunner
Radio: 6-channel TX and micro RX
Servos: 4 sub-micro
CG (center of gravity): 3 3/4" (95mm) behind the leading
edge
Prop Size: 12x6 Electric
Hardware Included: Yes
Speed Control : 40A Brushless
Recommended Battery: 11.1V 3-cell 2100mAh Li-Po
Control Throw (Ailerons): Low 1" (25mm) Up/Down or High 1
7/8" (48mm) Up/Down
Control Throw (Elevator): Low 3/4" (19mm) Up/Down or High
2 5/16" (58mm) Up/Down
Control Throw (Rudder): Low 1 3/4" (45mm) Left/Right or
High 2 3/4" (70mm) Left/Right
Approx. Assembly Time: 4 hours
|
|
