RC Cars | RC Airplanes | RC Boats | General Hobbies

Home |  Contact  |  Shipping  |  Site Map  |  Cart

E-Flite Airplanes, Brushless Motors

E-Flite Mini Pulse XT ARF, Ultimate Bipe

Product Search

RC Hobbies Home


Remote Control Cars


Radio Control Airplanes


Remote Control Boats


RC Helicopters


Model Trains


General Hobbies


Shop by Manufacturer

 

 

E-Flite

E-Flite Page

 

 

 

 

 

 

 

 

E-Flite Mini Pulse XT ARF

 
 

Mini Pulse XT ARF

E-Flite Mini Pulse XT ARF

 EFL2375 - Price: $99.99

 

The Mini Pulse XT is another aircraft in E-flite’s outstanding line of electric RC aircraft and accessories.  E-flite uses top-quality engineering and materials in everything they make, so you always get the maximum level of value and fun.  E-flite also backs all of its products with the best customer service and support in the hobby so your electric flight experience is always a positive one.

Pulse XT Features

  • 95% pre-built - get flying in 3 hours or less
  • Design based on Hangar 9's popular Pulse 40 XT
  • Lightweight balsa and light-ply construction
  • Covered in genuine UltraCote
  • Firewall accepts E-Flite Park 450 Brushless Outrunner without modifications
  • Factory-installed hinges and control horns
  • Steerable tail wheel
  • Factory-painted aluminum landing gear, fiberglass wheel pants, and cowling
  • Bolt-on wing and tail
  • Easy-access magnetic battery hatch

Pulse XT Specifications

Mini Pulse XT Parts
Wing Span: 42.5 in (1080mm)
Overall Length: 37.5 in (875mm)
Wing Area: 330 sq in (21.3 sq dm)
Flying Weight: 25-27 oz (795-965g)
Motor Size: Park 450 BL Outrunner, 890Kv
Radio: 4 channels
Servos: 4 sub-micros
Trim Scheme Colors: UltraCote White, Deep Blue, and Orange
CG (center of gravity): 2-3/4 in (70mm) behind the leading edge
Prop Size: 10x8 Electric
Hardware Included: Yes
Speed Control : 25A Pro Brushless
Recommended Battery: 2100 mAh 3-cell 11.1V Li-Po
Control Throw (Ailerons): 3/8 in (9mm) Low Rate or 1/2 in (13mm) High Rate
Control Throw (Elevator): 1/4 in (6mm) Low Rate or 1/2 in (13mm) High Rate
Control Throw (Rudder): 1-1/4 in (32mm) Low Rate or 1-1/2 in (38mm) High Rate
Scale: Park Flyer
Approx. Assembly Time: 3 hours

 

You will need..E-flite Park 450 BL Outrunner Motor, E-flite S75 Sub-Micro Servos (4), E-flite 25A Pro Brushless ESC, 4-channel or greater Radio, 6-channel micro receiver, 11.1V 3-Cell 2100mAh Li-Po Battery

 

 

 

 

 

 

 

 
 

 © 2008 RC Hobbies Online ◦ All Rights Reserved