Wing Span: 28
in (710mm)
Overall
Length: 31 in (790mm)
Wing Area: 435
sq in (28 sq dm)
Flying
Weight: 14.5-16.5 oz (410-470 g)
Motor Size: Park
370 Inrunner or Park 400 Outrunner
Radio: 4
channels w/3 sub-micro servos
Servos: 3
Sub-Micro
Trim Scheme
Colors: Red & White w/Black & Silver,
White
CG (center of
gravity): 3-1/2 in (90mm) to 4 in
(100mm) behind the leading edge of upper wing
Prop Size: 12
x 6 (included) for inrunner or 10 x 4.7 - 11 x
4.7 with Outrunner
Hardware
Included: Yes
Speed
Control: 20-Amp Brushless
Recommended
Battery: 11.1V 1200-1320mAh Li-Po
Control Throw
(Ailerons): 1" (25mm) (20 deg)
Up/Down Low Rate or 1-1/2" (38mm) (30 deg)
Up/Down High Rate
Control Throw
(Elevator): 1" (25mm) (20 deg)
Up/Down Low Rate or 2-3/8" (60mm) (45 deg)
Up/Down High Rate
Control Throw
(Rudder): 1" (25mm) (20 deg)
Right/Left Low Rate or 1-5/8" (40mm) (30 deg)
Right/Left High Rate
Scale: Park
Flyer
Approx.
Assembly Time: 4 - 6 hours
Gear Ratio: 6.6:1,
0.4 Module (66T spur with 10T pinion) gearbox
(included)
Items needed for Completion
Brushless Motor
20A Brushless ESC
4+ Ch Radio
3 Sub-micro Servos
Large Servo Arms
|
Servo Extensions
6 Ch Receiver
Li-Po Battery
Li-Po Charger
Foam Compatible CA
|
Supporting Products
|
