The Blade 400 3D is designed to give intermediate to advanced heli pilots a almost ready-to-fly experience like no other.  The completely factory assembled airframe allows the Blade 400 3D PNP to be ready for hovering and 3D aerobatics once you add your favorite transmitter, receiver, battery and charger.

• Completely factory-assembled airframe
• Capable of sport flying and 3D aerobatics right out of the box
• Factory-installed DS75 Digital Sub-Micro servos and G110 Micro Heading Lock gyro offer precise and powerful control
• Included 420H brushless motor and 25-amp brushless ESC deliver incredible power and performance
• CCPM control with push-pull elevator and direct-to-swash aileron/pitch linkages

The Blade 400 3D is designed to give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. There is nothing left to assemble or set up. The Blade 400 3D is ready for hovering and 3D aerobatics as soon as you finish charging the battery. And you can fly it just about anywhere, anytime thanks to the included Spektrum 2.4GHz DX6i radio system that avoids interference with other RC users, even those on other 2.4GHz systems. You also get the benefit of the DX6i’s advanced DSM2 protocol that provides the kind of locked-in, solid response that will let you fly even the most demanding 3D maneuvers with absolute precision.

The E-flite Blade CP Pro 2 has just taken the RTF 3D micro electric helicopter to the next level.  It's the industry’s only fully 3D-capable RTF micro heli that performs aerobatics like backward hurricanes and piro flips right out of the box.  Loaded with incredible features and an unmatched level of out-of-the-box 3D performance, the Blade CP Pro 2 a 3D machine to reckon with.

The high-power 370 main motor offers brushless-like performance, while the direct-drive N60 tail motor and G110 heading lock gyro offer incredibly locked-in tail control. The included E-flite HP6DSM 6-channel transmitter features full-range Spektrum 2.4GHz DSM2 technology, that, along with the factory-installed Spektrum AR6100 receiver, provides the locked-in, interference-free performance DSM is known for. A 2-in-1 control unit offers complete control of the main and tail motors, while three DS75 digtal sub-micro servos deliver precise CCPM control of the bell-hiller mixing equipped rotor head. 

Blade CP Pro RTF Electric Micro Heli  Price: $219.99

Based on the tried and true Blade CP platform, the Blade CP Pro adds the lightweight power of a 3-cell 800mAh Li-Po battery pack, the lightning quick cyclic response of Bell-Hiller mixing, and the upright or inverted agility of symmetrical main rotor blades. Plus, it can easily be outfitted with brushless power and a heading lock gyro, without the need for a new radio system or difficult modifications. For red-hot micro heli aerobatics in about the time it takes for you to charge a battery pack, nothing can touch the cutting-edge Blade CP Pro.

E-Flite Blade CP+ RTF Electric Micro Heli   Price: $199.99

The Blade™ CP+ is the perfect “next step” for anyone who’s mastered the basics of heli flight with a coaxial heli like the Blade CX (EFLH1200) or Blade CX2 (EFLH1250), and is ready for a model capable of more advanced maneuvers. It’s also an excellent choice for experienced pilots looking for the best in ready-to-fly micro helicopter performance and value.
 

The Blade CP+ includes all the impressive features of the original Blade CP, like CCPM and collective pitch, plus a number of new features and accessories that further enhance its flight performance for low-time and experienced pilots alike. The included, optional-use training gear set adds stability while also providing support and cushioning to prevent tip-overs and rotor blade strikes for newer pilots. The 3S 11.1V 800mAh Li-Po battery pack offers a significant boost in power and duration over the Ni-MH batteries found in other similar class models, and the included, optional-use symmetrical main rotor blades allow you to perform advanced aerobatics like loops, rolls and inverted flight without the need for a single hop-up. The separate receiver and advanced 3-in-1 control unit are plug-and-play compatible with brushless power systems and heading lock gyros so you can further enhance the capabilities of your Blade CP+ when you’re ready to take performance to the next level.

The Blade CP+ is versatile enough to fly anywhere, and everything needed to fly is included and installed such as the 3S 11.1V 800mAh Li-Po battery pack and balancing charger, 370 main and N30 tail motor, 3-in-1 mixer, ESCs and gyro, three S75 sub-micro servos and a 6-channel FM radio system with servo reversing and CCPM mixing. Plus, each Blade CP+ is test-flown at the factory to ensure precise performance and control which makes it truly ready to fly right from the box.

• No assembly required
• Includes everything you need to fly right out of the box
• Each model is individually test-flown at the factory
• CCPM (Cyclic/Collective Pitch Mixing) and collective pitch provide complete control
• Unique 6-channel FM receiver and advanced 3-in-1 control unit
• Plug-and-play compatibility with brushless power systems and heading lock gyros
• Optional hop-up and full replacement parts sold separately
• PLUS, at no extra cost, you get:
• An optional-use Training Gear Set for added stability and to prevent blade strikes
• Optional-use wooden symmetrical main blades for inverted flying and aerobatics
• 3S 11.1V 800mAh Li-Po battery pack
• DC Li-Po balancing charger

Main Rotor Diameter: 20.8 in (528mm)
Tail Rotor Diameter: 5.8 in (148mm)
Gross Weight: RTF with Li-Po battery, 10.5 oz (298 g)
Length: 20.7 in (526mm)
Motor Size: 370 main motor, N30 tail motor
Control System: CCPM