|

The Beaver was created by De Havilland of Canada to be the perfect
bush plane. Its designers knew a lot about wilderness flying living in
the shadow of the Great White North and built the Beaver to be
exceptionally rugged and powerful. Entering service in 1946, it quickly
established itself on backwoods routes throughout Canada and Alaska. It
went wherever the roads didn't, including lakes when retrofitted with
floats. This airborne pack mule still flies in remote areas today,
carrying fisherman to weeklong getaways or island-hopping tourists in
the Caribbean. Wherever people are looking to enjoy a secluded slice of
the great outdoors, chances are a Beaver is taking them there. It's only
fitting that such a plane be GWS's newest park flyer subject.
Easy Building
Designed for those afternoon getaways to the local park, the GWS
Beaver park flyer looks like a baby bush plane. Its all-foam fuselage is
molded to look like the real thing and comes with a realistic looking
cowl. No painting is required; decals are included for extra detail.
Assembly can be completed in just a couple of short evening sessions.
|
Click on an image to enlarge |
 |
| |
 |
A 3-channel radio system, micro flight pack, and charger are required
to complete assembly. GWS models has designed two new flight packs specifically
for use with the Beaver. These come with just about everything needed
for the onboard electronics, including the ICS100 electric speed
control, two servos, a R4N micro receiver, and a 600mAh battery pack. A
powerful EPS300C power system consisting of a 370-type electric motor
mated to a gear reduction drive comes in the kit. This all-in-one unit
simply pops onto the model's stick motor mount and can be easily swapped
for a different EPS system, should the modeler want to experiment with
different prop and gear reduction combinations.
Baby Bush Plane Performance
We flight tested the Beaver in calm conditions using a GWS Naro
flight pack with both the 600mAh and 270mAh 7.2V battery pack.
Naturally, the biggest difference was in flight times with the 600mAh
pack offering the longest at a little over 11 minutes. The 270mAh pack
lasted for half that time, yielding about five minutes worth of flying
fun. Takeoff performance with both packs was spirited, with the lighter
270mAh pack offering a slight climb advantage over the bigger pack.
We could takeoff in about the length of a picnic table and climb
briskly, just as if we were taking off from a secluded strip with trees
at the end of the runway. Once airborne, the Beaver's high wing and
simple rudder/elevator controls made for stable flight performance that
was reminiscent of a trainer. We flew lazy 15-foot circles at half
throttle without a hint of a tip stall. There was plenty of elevator
authority and horsepower for loops too. Hushing down for landing, the
Beaver retained superb control authority all the way to touchdown. The
only thing the experience lacked was a scenic mountain backdrop and a
miniature backwoods airstrip.
GWS models has a real winner on their hands with the new Beaver park flyer.
Its scale good looks and baby bush plane performance will provide hours
of outdoors enjoyment, much like its full scale inspiration has for over
50 years.
|
Specifications |
|
Wingspan:
Wing Area:
Motor:
Radio:
Length:
Battery:
Flight Pack: |
39.8 in
260 sq in
EPS300C Power System (370 motor and gearbox)
3-ChannelMinimum
27.4 in
270mAh or 600mAh 7.2V battery pack
2 micro or mini servos, micro electronic speed control, micro
receiver, and 600mAh battery |
DHC-2 Beaver Park Flyer
GWS1030 -
Price:
$34.21
|