|
JR’s new XP7202
packs the convenience of synthesized channel selection, PCM
precision, 72 oz/in digital servos and JR quality into one
affordable package.
 If
you’re ready to move up to a 7-channel radio, this is the one you’ve
been waiting for. With its breakthrough features along with the
unmistakable feel of JR quality, the XP7202 is everything a serious
sport flyer dreams of.
And speaking of breakthrough features, let’s start with one you’ll
really appreciate.
NO MORE EXTRA CRYSTALS TO CHANGE CHANNELS
Since we have 50 frequencies to work with, it’s rare to find
several other flyers using your channel. But when it does
happen, all you can do is wait your turn or plug in another set
of crystals.
Well, the XP7202 ends that problem right off the bat. You’ll
just check for the least-used channels at your field, program
one into your transmitter, touch your R790 ScanSelect receiver’s
“scan” button, bring your transmitter close and it’ll tune to
your programmed channel automatically.
PCM PRECISION ISN’T JUST FOR THE PROS ANYMORE
You’ve probably noticed that competition flyers always fly with
PCM modulation, and there are good reasons why they do. Modern
PCM receivers offer unmatched accuracy of control plus an
additional layer of resistance to interference.
And as an advanced sport flyer, we figured you deserved the same
advantage. Which is the reason JR equipped the XP7272 with the
R790 ScanSelect PCM receiver.
And by the way. The XP7202 is compatible with all previous JR
receivers – PCM and FM – so it won’t make your existing
equipment obsolete.
SUPERB SERVOS, 20-MODEL MEMORY AND MORE
Let’s start with the “and more” part. As you can see in the
large photo of the XP7202 transmitter, its display is unlike
anything in its class – more detailed and independent of fixed
elements. Which means it makes programming easier to comprehend
and even easier to execute.
Next, the 7202’s servos – the new zero deadband, 72 oz/in DS821
digitals – not only out-perform those of competing systems, they
feature special ultra-tough resin gears for long-lasting,
precise performance.
And finally, it has all of the programmable features airplane
and heli enthusiasts need to get the best out of their models,
plus it’s an absolutely unbeatable value.
Features
Fully synthesized and crystal-free
No dial frequency
Improved programming with more mixes and better interface
Based on proven 8103 package
20-model memory
R790 receiver & 72-ounce DS821 servos included
Tech Notes
Transmitter: XP7202
7 Channel
20 model memory
Aircraft and Heli programming
S-PCM (as supplied) Z-PCM and PPM (FM)
Fully Synthesized Transmitter (Frequency selection is part of
the programming)
Fully Digital trims
1500mah NiMh Battery
Receiver: R790 Scan Select PCM
PCM Modulation
7 Channels
DSC capable
Servos:DS821 Sport Digital Servos
Torque 72 oz/in @ 4.8V, 88 oz/in @ 6.0V
Speed .19 sec/60 deg @ 4.8V, .15 Sec/60 deg @ 6.0V
Size: 1.50” X .94” X 1.47”
Weight: 1.5 oz
Ball-Bearing: Single
Motor: Cored
Programming Features: System Mode
Model Select
Model Name
Model type Select
Modulation Select
Model reset
Trainer system select
Throttle Recovery
Input Select (Switch Select-ability for Aux 2 and Gear)
Wing type
Swashplate type
Frequency Selection (Ch 15 - 60)
Dual Rate Switch Select
Airplane Function Mode
Dual Rates
Exponential
Servo Reverse
Sub trim
Travel Adjust
Elevator to Flap Mix
Aileron To Rudder Mix
Flap System
Differential
Programmable Mix (1-6)
Fail Safe
Servo monitor
Helicopter Function Mode
Dual Rates
Exponential
Servo Reverse
Sub trim
Travel Adjust
Swashplate Mix
Throttle Hold
Throttle Curve (3) (5 pt mix)
Pitch Curve (4) (5 pt mix)
Revolution Mix
Gyro Sensing
Fail Safe
Servo monitor
Specifications
Channels: 7 Channel
Modulation: PCM & PPM
Band: Fully Synthesized Transmitter
Servos: DS821 Sport Digital Servos
Receiver: R790 Scan Select PCM
Programming Features: Aircraft and Heli
Model Memory: 20 Model Memory
Transmitter (Tx) Battery Type: 1500mah NiMh Battery
|
|
