| |
The Nitro 4-Tec with the
power of the TRX 2.5 or 3.3 Racing Engine defines a whole new category of
Ready-To-Race® cars from Traxxas. Out of the box, the rear exhaust TRX
2.5 propels the Nitro 4-Tec to Super car status with speeds over 60
MPH, nearly twice as fast as most competitors!
The Nitro 4-Tec rc car is race ready with its adjustable 2-speed
transmission, full ball bearings, 3-belt drive system, disc brake, and
racing tires on 2.0 mesh tuner wheels. The 2.5mm blue anodized
aluminum chassis is fully countersunk on the bottom, including the
special engine mounting screws.
The installed TRX 2.5 nitro engine features a tuned pipe and the
push-button starting convenience of the Traxxas EZ-Start 2. The
sophisticated, fully adjustable suspension uses oil filled Ultra
Shocks and bellcrank steering for precise control. The center-mounted
fuel tank keeps the weight balance consistent as the fuel level
changes. No messy painting or trimming is required with the
hot-looking ProGraphix painted body.
NOW WITH PRE-GLUED RACING TIRES! These durable Traxxas 2.0 mesh wheels
for the Nitro 4-Tec fit all popular on-road touring sedans. They come
with superb pre-glued racing tires with contoured molded foam inserts.
Their lower profile increases sidewall strength and contact patch. The
10-fork design and realistic aluminum finish will enhance the look of
any tourer. Packaged in sets of four for convenience and economy.
-
60+ MPH top speed
-
TRX 2.5 or 3.3 Nitro Racing
Engine
-
3-belt 4-wheel drive
system
-
Adjustable 2-speed
auto-shifting transmission
-
200mm wide
-
Very-low center of
gravity (CG)
-
Fuel tank is mounted at
the center of gravity
-
2.0 Nylon mesh wheels
(bright, aluminum finish)
-
Pre glued racing tires
with contoured inserts
-
Reactive caster
capability and adjustable caster angle
-
Full ball bearings
-
Full turnbuckles
-
Adjustable ride height
-
Tuned exhaust pipe
-
Fully-countersunk
aluminum chassis
-
Engine and engine mount
are a structural part of the chassis
-
Front upper and lower
suspension arms
-
Bellcrank steering
system
-
Planetary gear
differentials with bearing supported shafts
-
Optional ball
differentials, gearsets, graphite chassis, aluminum pulleys, and
sway bars, with sliding adjustable sway bar mounts.
Nitro 4-Tec
Specifications
Type: 4-wheel drive
nitro touring sedan RTR
Scale: 1/10
Length: 17 in
Weight: 62 oz
Wheelbase: 10.16 in (258 mm)
Chassis: Aluminum [6061-T6]
Suspension: Independent front and rear A-arm
Drive Train: Belt-Driven 4wd
Tire Type: Pre glued with contoured inserts
Nitro Engine: TRX 2.5 w/ EZ-Start
Radio: Traxxas TQ-3 (2-channel)
Wheel Size: 2.0 in Nylon Mesh
Fuel Tank Capacity: 75cc
Nitro 4-Tec
3.3 RC Car
TRA4809 - Price:
$354.99
|
|
