 |
P350
Round Weights
Round Weights are easy to install. Drill 3/8" diameter
hole in car. Cut off the weight you need, keeping car
as heavy as specifications allow. Price: $2.80
|
|
 |
P351
Tapered Weight
Incremental Weight allow adjustments
to a car's weight, even on race day. Break off just
enough to meet specifications, keeping car as heavy as
possible. Attach weight to bottom or countersink it
under the car. Screws included. Price: $2.80
|
|
 |
P352
Strip Weights
Incremental Weights allow adjustments
to a car's weight, even on race day. Break off just
enough to meet specifications, keeping car as heavy as
possible. Attach weight to bottom or countersink it
under the car. Screws included. Price: $2.80
|
|
 |
P353
Bar Weight
Incremental Weights allow adjustments
to a car's weight, even on race day. Break off just
enough to meet specifications, keeping car as heavy as
possible. Attach weight to bottom or countersink it
under the car. Screws included.
Price: $2.80
|
|
 |
P354
Combo Weights
Combo Weights are easy to install. Drill 3/8" dia.
hole in car, or may be attached to side of car. Cut
off the weight you need, keeping car as heavy as
specifications allow. Price: $2.80
|
|
 |
P355 Hob-E-Lube
Dry White
This is a fine, non-staining
Teflon lubricant with an additive that clings to
smooth surfaces. Use where local rules prohibit the
use of graphite.
Price:
$3.14
|
|
 |
P356
Speed Kit
Here is everything for a race-winning
car! It offers a 13% savings over individual
components if purchased separately:
Hob-E-Lube Dry Graphite Lubricant (P358),
Wheel Turning Mandrel (P357),
Axles and Polishing Kit (P359),
Bar Weight (P353),
as well as speed tips and techniques!
Price: $9.77 |
|
 |
P357
Wheel Turning Mandrel
Here is what you need to hold a wheel securely in a
drill while removing mold seam for smooth fast-running
wheels. Includes two piece mandrel, two grades of
sandpaper and complete instructions. Price: $2.88
|
|
 |
P358 Hob-E-Lube
Dry Graphite
This fine, special-ground lubricant with Molybdenum,
is safe on all surfaces and easy to use. It is the
racer's advantage. Price: $3.14
|
|
 |
P359
Axles & Polishing Kit
Here are five B.S.A. type axles, a sheet of wet-or-dry
paper, polishing pumice, and easy-to-follow
instructions for making high performance axles.
Price: $2.53
|
|
 |
P379
Stick-On Designer Weight
Stick-on Weights allow you to cut off weight needed.
Attach to side of car as part of design. Use included
double-sided tape. Price: $2.80
|
|
 |
P378
Adjustable Stick-On Weight
Our weights can be adjusted by hand right up until the
big race. Attach weights to the bottom of your PineCar
with the included double-stick tape. The weight and
the tape are thin enough for the 3/8" clearance needed
for most Pinewood Derbies. The weights are also easily
adjusted for various sizes of PineCars.
Price: $2.80
|
|
 |
P457
5 Axles
Five high-quality, nail-type axles.
Compatible with both BSA and PineCar wheels. Meet all
regulations and race requirements. Perfect for
participants who are restricted from using the
single-piece axles. Also great to use as replacement
parts for other brands' damaged or defective axles.
Price: $1.10 |
