RC Cars | RC Airplanes | RC Boats | General Hobbies

Home |  Contact  |  Shipping  |  Site Map  |  Cart

Remote Control Cars & Trucks, RC Airplanes,

Radio Control Helicopters and Remote Control Boats

Product Search

RC Hobbies Home


Remote Control Cars


Radio Control Airplanes


Remote Control Boats


RC Helicopters


Model Trains


General Hobbies


Shop by Manufacturer

 

Instructions for Thumlers Rotary Rock Tumblers

Polishing rocks in Thumler Rotary Tumblers which include the Model T, AR1, AR2 Rotary Tumblers and Model B Tumbler.

1. Fill barrel 1/2 to 5/8 full of stones.  Pour in package marked COARSE (60-90).  Add water even with top stones.  Run tumbler with this mixture for approximately 7 days, 24 hours a day, or until smooth.  WASH STONES AND BARREL WELL.  (Kitchen colander is ideal for washing stones, but do not wash into sink drains.)

2. Place stones back into barrel.  Pour in package marked FINE (120-220).  Add water even with top of stones.  Run tumbler with this mixture for approximately 7 days, 24 hours a day, or until rocks are shiny when wet.  WASH STONES AND BARREL WELL.

3. Place stones back into barrel.  Pour in package marked PRE-POLISH (500F).  Add water even with top of stones.  Run the tumbler with this mixture approximately 3 days, 24 hours a day, or until rocks show a luster when dry.  WASH STONE AND BARREL WELL.

4. Place stones back into barrel.  Pour in package marked POLISH.  Add water even with top of stones.  Run tumbler with this mixture approximately 7 days, 24 hours a day, or until rocks show a luster when dry.  WASH STONES AND BARREL WELL.

5. Place stones back into barrel.  Add enough powdered detergent to make a stiff suds.  Add water even with top of stones.  You may also add sawdust or some similar material to cushion the rocks during this clean-up stage.  Run tumbler with this mixture overnight.  WASH STONES AND BARREL WELL.  SPREAD OUT ROCKS ON DRY SURFACE AND INSPECT YOUR FINISHED GEMSTONES.

The grit pack (THU304) for the #130/#140 tumblers is enough for 4 applications for units with 3lb. barrels, 2 applications for A-R2.

 Model  Capacity  Amount per Barrel
 Model T, A-R1
 Model T-2, A-R2
 1-qt, barrel, 3 lbs
 2-qt, barrels, 6 lbs

 Coarse......................4 oz.
 Fine......................... 4 oz.
 Prepolish....................2 oz
 Polish........................2 oz

 Model A-R6  9 lbs  Coarse......................8 oz.
 Fine..........................8 oz.
 Prepolish....................4 oz.
 Polish........................4 oz.
 Model A-R12
 Model B
 12 lbs
 15 lbs

 Coarse.......................1 lb.
 Fine...........................1 lb.
 Prepolish..................1/2 lb.
 Polish......................1/2 lb.

  Ultra Vibe Instructions»

 

 

 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 

 © 2008 RC Hobbies Online ◦ All Rights Reserved